Engineers are often faced with the problem of optimizing a process that includes a number of input variables. It could be an analysis of a manufacturing process, or even an analysis of a business process. They're often challenged to find ways to reduce warranty costs that result from field failures. For example, how can we better understand the field effects on an actuator assembly used in a garden tractor as a means of reducing warranty returns. One effective means is to design a special test to determine which factors are important to the life of the actuators. Design of Experiments (DOE) provides a structured means to see which factors are important to component life.
Figure 1: QuART Design Of Experiments Tab
2. Define the Problem and Decide Which Variables to Study: Our problem was to determine which factors are important to the field reliability of the actuator used on the garden tractor. From past experience and engineering judgment, four factors were selected for evaluation and the information was entered in the "Problem Definition" tab. Each factor was tested at two levels that were possible input conditions affecting reliability. The difference in geographic location was simulated by a difference in steady state operating temperature.
Figure 2: QuART Design Of Experiments Problem Definition Tab
3. Run the Tests and Input the Reliability Data (Time or Cycles, etc.): The reliability data was entered into the "Run Tests" tab of the QuART DOE tool in the rows appropriate for the specific test conditions.
Figure 3: QuART Design Of Experiments Test Results Tab
4. Examine the Results at the Desired Confidence: Once the test data was entered, the "Relationship" tab was used to view the results. Assuming that a very high confidence level (say 99%) is desired in the results, the "Acceptable Risk" window was used to choose 1% (note that risk equals 1-confidence). The right hand column indicates that only the Actuator Alignment was significant to reliability at this level of confidence.
Figure 4: QuART Design Of Experiments Relationship Tab For 1.00%
If the engineer is willing to accept a 10% risk, the risk value can be changed to see the effects. For this test at the higher risk level, the Actuator Case Material also became a significant factor.
Figure 5: QuART Design Of Experiments Relationship Tab For 10.00%
5. Interpretation of Results: For this application, because the factors had positive coefficients in the resulting relationship, it was clear that maintaining Tightly Controlled Alignment and use of High Strength Plastic were means that should be used to improve field reliability. The other factors addressed by the DOE appeared to have little significance.
Free Downloads - Quanterion is making available the following FREE downloads from its web site.
|Click here to download a free copy of QuART!|
Click here to download a free index to the "Reliability Toolkit: Commercial Practices Edition"!
Click here to download a free copy of "The Rome Laboratory Reliability Engineer's Toolkit"!
|For more information, contact: email@example.com.|